en 
tr 
There are some simple solutions you can use to reduce the fuel consumption of agricultural vehicles. By applying these solutions, you can save on tractor fuel consumption.
Factors to Consider about Fuel Consumption
In order to reduce the fuel consumption of tractors and save money, you can consider the following 5 main factors:
- Speed
- Tires
- Settings
- Type of work
- Load
Factors with the Biggest Impact on Fuel Consumption
To save on tractor fuel consumption, you should consider the following factors:
Adjusting Tire Pressure is Crucial for Fuel Economy
Depending on the type of ground, tire pressure is the factor that has the greatest impact on your fuel consumption.
An over-inflated tire in the fields causes excessive slip. Therefore, more engine power is needed to make up for lost grip and transfer better traction to the ground. This causes an increase.
On roads, an underinflated tire will have a very large contact surface area with the asphalt. In this way, it will produce significant resistance, which requires more engine power.
Therefore, the tire pressure should be neither too low nor too high for fuel consumption savings. You can reduce fuel consumption with the most suitable pressure for the floor type.
The original tires supplied with your tractor are not the best tires for your machine. Therefore, replacing these tires with ones more suitable for your main tractor use is best for both consumption and tractor performance.
Using low pressure tires on the tractor that are wider than the original kit has a strong effect on fuel consumption. After just a few months of use, you can more than offset the additional cost of these tires from the subsequent fuel savings. Although these tires may seem more expensive at first, they are actually a very economical choice in the long run.
Use Eco PTO
This feature is available on almost all new tractors. 540 rpm PTO is achieved using 20-25% lower engine speed than in full power mode. If you reduce the engine speed, the eco-start still provides the same power but uses 15-20% less fuel. In this way, you reduce consumption.
Save Fuel Consumption by Working at Shallower Depths
Deep work is not always beneficial for heavy tasks such as stubble ploughing and stubble removal. If your soil is regularly tilled, if you take care to avoid over-compaction, or if your tractor has low-pressure VF tires, you can reduce your working depth by a few centimeters without affecting the crop yield.
Tests show that reducing depth by 8 cm provides 26% more fuel savings.
Save by Reducing Speed
If you reduce your speed by 10 km/h, you can save a lot of fuel throughout the year, especially if there is a long distance between the farm and your fields. Even if you lose an extra 5 or 6 minutes per trip, you can save money by reducing consumption.
Correct Weight Distribution
It directly affects your traction power consumption required for farming. If you miscalculate the load transfer, your tractor will not be able to balance and you will not be able to take full advantage of its power. For this reason, by increasing the axle load according to the tool used, you can improve the grip of your tractor, prevent slipping and get maximum traction from your engine with zero loss. In this way, you can reduce your fuel consumption.
Fuel Consumption and Purchase Decision
Considering fuel usage is an important aspect of purchasing a tractor. The aforementioned shows that the closer an engine is to its maximum potential at which it operates, the more efficient the fuel is used. For this reason, running a small engine hard is preferable to a large engine. Unless you have a need for large amounts of power, it's always better to avoid large tractors.
