en 
tr 
Although it can be difficult to conduct maintenance of your tractor, it is important to understand when and why you should do it. Because when you don't do the necessary maintenance or fail to have it done, the efficiency you will get from your tractor will decrease considerably. For this reason, you should have information about hydraulic oil change in tractors and you should perform this change when necessary.
How Does the Hydraulic System Work in the Tractor?
This system uses a liquid known as hydrostatic oil, which performs various functions. It has functions such as lubricating and cooling certain parts of the machines, transferring energy under pressure. The oil must be changed periodically to keep the system in good condition and prevent serious damage.
How to Change Hydraulic Oil in Tractors?
It is very important to have information about how often the hydraulic oil should be changed before the hydraulic oil change in tractors.
You can follow the steps below for hydraulic oil change:
Define Your Tractor's Specifications
The first thing you need to know is what kind of oil your tractor needs. Different tractors have different technical specifications for their hydraulic systems. That's why it's important to read the owner's manual and understand exactly what type of oil you should use in your tractor.
Drain the Oil from the Hydraulic System for Hydraulic Oil Change in Tractors
Before draining all of the oil from your tractor's hydraulic system, you should make sure to disconnect the hydraulics from anything they are attached to. To find a safe and convenient way to drain all oil from a tractor's hydraulic system, it is best to lift the tractor on a hydraulic jack. So safety should be your priority.
Remove Oil Filler Cap
When you raise your tractor on a hydraulic jack, get under it and remove the oil filler cap from your engine's filter. After this process, you can use a drain pan to collect all the oil drained from the system into an easily disposable container.
Collect Consumables
In order to start the process of draining the oil from the hydraulic system of your tractor, you need to have several different materials. To complete the oil draining process from your tractor, you must have:
- Drain oil,
- A new hydraulic oil filter,
- Paper towels and
- An oil pan large enough to hold all the old hydraulic oil
Find Your Tractor's Oil Filter for Hydraulic Oil Change on Tractors
This part of the tractor has a round cover that can be easily removed with a socket wrench. The oil filter has a large O-ring that needs replacing and its reusable housing.
Reinstall the Oil Filter
After placing your new oil filter in its slot, you should make sure that you put it back in firmly. A tight seal is required for proper operation. Therefore, you may find it difficult at this stage.
Tighten Drain Plug
You need to make sure that all excess oil is drained from the hydraulic system of your tractor. If you notice that there is still hydraulic oil left, you should remove the oil pan from the bottom of your machine and drain the excess fluid.
Check for Leaks
For hydraulic oil change in tractors, after adding all of your oil, you should check if there is any leakage from any part of the tractor. If you find a leak during this process, you can tighten any bolts or screws necessary to fix the problem. It's also a good idea to double-check that all fluid levels are where they should be.
After performing the above-mentioned check, get behind your tractor and check for leaks that may not have been visible while you were under it. If all is well, turn on your machine and run it for a few minutes so that the oil can circulate properly.
Add New Hydraulic Oil
After your oil sump is empty, you can add your new hydraulic oil to the filling line next to the tractor's engine. While adding all the oil required for a full fill, you can pour it directly into your machine's oil filter using a funnel.
Add Oil to the Reservoir
After adding your new hydraulic oil to the appropriate hose attached to the filter of your machine, it is time to add fresh hydraulic oil to the reservoir tank of the tractor. To do this, you should use a funnel and place the new oil just above where you will add it.
